Contribution and Reservation

(88·10¹⁸⁵-7)/9 =: 9(7)₁₈₅_<186>; = 106469059443036760997_<21> · [9183680055903094924298360829964704420218821222150018490715021659276016173670052180974121555249467318600924186201529936244612006367342465042476161141852858123829707741_<166>] SUBMIT/RESERVE

Status

Expression:	(88·10¹⁸⁵-7)/9
Composite Factor:	918368005590309492429836082996470442021882122215001849071502 165927601617367005218097412155524946731860092418620152993624 4612006367342465042476161141852858123829707741 (166-digit)
Status:	Not factored. Not reserved. You can submit its factors or reserve it for submitting in the future.

How to factor it

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 187.55-digit and the GNFS difficulty is 165.96-digit. SNFS must be faster than GNFS. It will take about 7 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 97777_185.
Put the following polynomial file 97777_185.poly in there too.
And then, run "perl factMsieve.pl 97777_185".

97777_185.poly ^*1

n: 9183680055903094924298360829964704420218821222150018490715021659276016173670052180974121555249467318600924186201529936244612006367342465042476161141852858123829707741
m: 20000000000000000000000000000000000000
deg: 5
c5: 11
c0: -28
skew: 1.21
type: snfs
lss: 1
rlim: 9400000
alim: 9400000
lpbr: 28
lpba: 28
mfbr: 54
mfba: 54
rlambda: 2.5
alambda: 2.5

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

Efforts by ECM

The efforts by ECM to find small factors of this 166-digit composite number are not reported yet. Please report your efforts by ECM. (Anonymous reports are not acceptable)

Level	B1	Reported runs Total / Required runs (Required runs for lower level)
20	11e3	0 / 74
20	11e3	/ 74
25	5e4	0 / 214 (21)
25	5e4	/ 214 (21)
30	25e4	0 / 430 (50)
30	25e4	/ 430 (50)
35	1e6	0 / 904 (118)
35	1e6	/ 904 (118)
40	3e6	0 / 2350 (322)
40	3e6	/ 2350 (322)

Command line to find prime factors up to about 20-digit

echo 9183680055903094924298360829964704420218821222150018490715021659276016173670052180974121555249467318600924186201529936244612006367342465042476161141852858123829707741 | ecm -n -c 74 11e3

Command line to find prime factors up to about 25-digit

echo 9183680055903094924298360829964704420218821222150018490715021659276016173670052180974121555249467318600924186201529936244612006367342465042476161141852858123829707741 | ecm -n -c 214 5e4

Command line to find prime factors up to about 30-digit

echo 9183680055903094924298360829964704420218821222150018490715021659276016173670052180974121555249467318600924186201529936244612006367342465042476161141852858123829707741 | ecm -n -c 430 25e4

Command line to find prime factors up to about 35-digit

echo 9183680055903094924298360829964704420218821222150018490715021659276016173670052180974121555249467318600924186201529936244612006367342465042476161141852858123829707741 | ecm -n -c 904 1e6

Command line to find prime factors up to about 40-digit

echo 9183680055903094924298360829964704420218821222150018490715021659276016173670052180974121555249467318600924186201529936244612006367342465042476161141852858123829707741 | ecm -n -c 2350 3e6

Submit factors

Make reservation

Back to Factorizations of near-repdigit numbers