counterSince 16 Jun 2000STUDIO KAMADA英語 ⇒ 日本語
Home > Math > Factorizations >

Contribution and Reservation


(58·10184-13)/9 =
6(4)1833<185>
= 3 · 67 · 149 · 2767 · 793319776368881<15> · 53816679229915529<17> · [18214985184992353835271898279585123374501661072982675528889762514452702675394715114840210107925769400225498317017765356773983860303414014855692129<146>] SUBMIT/RESERVE

Status

Expression:(58·10184-13)/9
Composite Factor:182149851849923538352718982795851233745016610729826755288897
625144527026753947151148402101079257694002254983170177653567
73983860303414014855692129
(146-digit)
Status:Not factored. Not reserved. You can submit its factors or reserve it for submitting in the future.

How to factor it

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 186.46-digit and the GNFS difficulty is 145.26-digit. SNFS must be faster than GNFS. It will take about 7 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

  1. Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 64443_184.
  2. Put the following polynomial file 64443_184.poly in there too.
  3. And then, run "perl factMsieve.pl 64443_184".
64443_184.poly *1
n: 18214985184992353835271898279585123374501661072982675528889762514452702675394715114840210107925769400225498317017765356773983860303414014855692129
m: 10000000000000000000000000000000000000
deg: 5
c5: 29
c0: -65
skew: 1.18
type: snfs
lss: 1
rlim: 9000000
alim: 9000000
lpbr: 28
lpba: 28
mfbr: 54
mfba: 54
rlambda: 2.5
alambda: 2.5

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

See also


Efforts by ECM

The efforts by ECM to find small factors of this 146-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 30-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)

LevelB1Reported runs
Total / Required runs
(Required runs for lower level)
Name 
3025e40 / 0  
351e6118Makoto KamadaJun 28, 2009
118 / 904  
/ 786
403e60 / 2318 (280)  
/ 2318 (280)  
4511e60 / 4475 (672)  
/ 4475 (672)  
5043e60 / 7553 (1276)  
/ 7553 (1276)  
Command line to find prime factors up to about 35-digit
echo 18214985184992353835271898279585123374501661072982675528889762514452702675394715114840210107925769400225498317017765356773983860303414014855692129 | ecm -n -c 786 1e6
Command line to find prime factors up to about 40-digit
echo 18214985184992353835271898279585123374501661072982675528889762514452702675394715114840210107925769400225498317017765356773983860303414014855692129 | ecm -n -c 2318 3e6
Command line to find prime factors up to about 45-digit
echo 18214985184992353835271898279585123374501661072982675528889762514452702675394715114840210107925769400225498317017765356773983860303414014855692129 | ecm -n -c 4475 11e6
Command line to find prime factors up to about 50-digit
echo 18214985184992353835271898279585123374501661072982675528889762514452702675394715114840210107925769400225498317017765356773983860303414014855692129 | ecm -n -c 7553 43e6

Submit factors

Name:
(optional)
(Leave a blank or enter anonymous to withhold your name)
E-Mail:
(required)
Factorization Results:
(required)
Factorization Software:
(optional)
Execution Environment:
(optional)

Make reservation

Name:
(required)
E-Mail:
(required)
(Don't forget reservation key that appears after you click this button)

Back to Factorizations of near-repdigit numbers