Contribution and Reservation

(56·10¹⁹⁸+43)/9 =: 6(2)₁₉₇7_<199>; = 11 · 2953 · 5742257 · [33358518872533997104765547264904131300830484987199828892773823033281034588301937421431985465419115446302535921164583201960013853988964371799056367828290320716369303810796656202987306082017_<188>] SUBMIT/RESERVE

Status

Expression:	(56·10¹⁹⁸+43)/9
Composite Factor:	333585188725339971047655472649041313008304849871998288927738 230332810345883019374214319854654191154463025359211645832019 600138539889643717990563678282903207163693038107966562029873 06082017 (188-digit)
Status:	Not factored. Not reserved. You can submit its factors or reserve it for submitting in the future.

How to factor it

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 201.15-digit and the GNFS difficulty is 187.52-digit. SNFS must be faster than GNFS. It will take about 21 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 62227_198.
Put the following polynomial file 62227_198.poly in there too.
And then, run "perl factMsieve.pl 62227_198".

62227_198.poly ^*1

n: 33358518872533997104765547264904131300830484987199828892773823033281034588301937421431985465419115446302535921164583201960013853988964371799056367828290320716369303810796656202987306082017
m: 10000000000000000000000000000000000000000
deg: 5
c5: 14
c0: 1075
skew: 2.38
type: snfs
lss: 1
rlim: 15800000
alim: 15800000
lpbr: 29
lpba: 29
mfbr: 56
mfba: 56
rlambda: 2.6
alambda: 2.6

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

Efforts by ECM

The efforts by ECM to find small factors of this 188-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 30-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)

Level	B1	Reported runs Total / Required runs (Required runs for lower level)	Name
30	25e4	0 / 0
35	1e6	118	Makoto Kamada	May 24, 2009
		118 / 904
		/ 786
40	3e6	0 / 2318 (280)
40	3e6	/ 2318 (280)
45	11e6	0 / 4475 (672)
45	11e6	/ 4475 (672)
50	43e6	0 / 7553 (1276)
50	43e6	/ 7553 (1276)

Command line to find prime factors up to about 35-digit

echo 33358518872533997104765547264904131300830484987199828892773823033281034588301937421431985465419115446302535921164583201960013853988964371799056367828290320716369303810796656202987306082017 | ecm -n -c 786 1e6

Command line to find prime factors up to about 40-digit

echo 33358518872533997104765547264904131300830484987199828892773823033281034588301937421431985465419115446302535921164583201960013853988964371799056367828290320716369303810796656202987306082017 | ecm -n -c 2318 3e6

Command line to find prime factors up to about 45-digit

echo 33358518872533997104765547264904131300830484987199828892773823033281034588301937421431985465419115446302535921164583201960013853988964371799056367828290320716369303810796656202987306082017 | ecm -n -c 4475 11e6

Command line to find prime factors up to about 50-digit

echo 33358518872533997104765547264904131300830484987199828892773823033281034588301937421431985465419115446302535921164583201960013853988964371799056367828290320716369303810796656202987306082017 | ecm -n -c 7553 43e6

Submit factors

Make reservation

Back to Factorizations of near-repdigit numbers