counterSince 16 Jun 2000STUDIO KAMADA英語 ⇒ 日本語
Home > Math > Factorizations >

Contribution and Reservation


6·10172-1 =
5(9)172<173>
= 71 · 5333 · 10527309174692505715358220955631<32> · [15052337248182079245295376732473140587727231583696298965536998382697969877116207805028160665561308034389058830834673663504559791338218603<137>] (Serge Batalov / GMP-ECM 6.2.1 B1=3000000, sigma=3257129926 for P32 / Oct 5, 2008) SUBMIT/RESERVE

Status

Expression:6·10172-1
Composite Factor:150523372481820792452953767324731405877272315836962989655369
983826979698771162078050281606655613080343890588308346736635
04559791338218603
(137-digit)
Status:Not factored. Not reserved. You can submit its factors or reserve it for submitting in the future.

How to factor it

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 173.38-digit and the GNFS difficulty is 136.18-digit. SNFS must be faster than GNFS. It will take about 3 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

  1. Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 59999_172.
  2. Put the following polynomial file 59999_172.poly in there too.
  3. And then, run "perl factMsieve.pl 59999_172".
59999_172.poly *1
n: 15052337248182079245295376732473140587727231583696298965536998382697969877116207805028160665561308034389058830834673663504559791338218603
m: 20000000000000000000000000000000000
deg: 5
c5: 75
c0: -4
skew: 0.56
type: snfs
lss: 1
rlim: 5400000
alim: 5400000
lpbr: 27
lpba: 27
mfbr: 52
mfba: 52
rlambda: 2.4
alambda: 2.4

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

See also


Efforts by ECM

The efforts by ECM to find small factors of this 137-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 40-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)

LevelB1Reported runs
Total / Required runs
(Required runs for lower level)
Name 
403e62500Dmitry DomanovJul 1, 2009
2500 / 2023  
4511e60 / 3872  
/ 3872
5043e60 / 7452 (1104)  
/ 7452 (1104)  
5511e70 / 17749 (3091)  
/ 17749 (3091)  
6026e70 / 42014 (7635)  
/ 42014 (7635)  
Command line to find prime factors up to about 45-digit
echo 15052337248182079245295376732473140587727231583696298965536998382697969877116207805028160665561308034389058830834673663504559791338218603 | ecm -n -c 3872 11e6
Command line to find prime factors up to about 50-digit
echo 15052337248182079245295376732473140587727231583696298965536998382697969877116207805028160665561308034389058830834673663504559791338218603 | ecm -n -c 7452 43e6
Command line to find prime factors up to about 55-digit
echo 15052337248182079245295376732473140587727231583696298965536998382697969877116207805028160665561308034389058830834673663504559791338218603 | ecm -n -c 17749 11e7
Command line to find prime factors up to about 60-digit
echo 15052337248182079245295376732473140587727231583696298965536998382697969877116207805028160665561308034389058830834673663504559791338218603 | ecm -n -c 42014 26e7

Submit factors

Name:
(optional)
(Leave a blank or enter anonymous to withhold your name)
E-Mail:
(required)
Factorization Results:
(required)
Factorization Software:
(optional)
Execution Environment:
(optional)

Make reservation

Name:
(required)
E-Mail:
(required)
(Don't forget reservation key that appears after you click this button)

Back to Factorizations of near-repdigit numbers