Contribution and Reservation

(16·10²³⁷-1)/3 =: 5(3)₂₃₇_<238>; = 41 · 43 · 194161169 · 809817643 · 390823792531430104031_<21> · [49228409945014451582078571603601207431885178000257836419796157942293806981703913688420430727714519132118778080449532800862622876428807127695683403073333260005113627804924496330281659235968971290683_<197>] SUBMIT/RESERVE

Status

Expression:	(16·10²³⁷-1)/3
Composite Factor:	492284099450144515820785716036012074318851780002578364197961 579422938069817039136884204307277145191321187780804495328008 626228764288071276956834030733332600051136278049244963302816 59235968971290683 (197-digit)
Status:	Not factored. Not reserved. You can submit its factors or reserve it for submitting in the future.

How to factor it

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 240.30-digit and the GNFS difficulty is 196.69-digit. SNFS must be faster than GNFS. It will take about 426 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 53333_237.
Put the following polynomial file 53333_237.poly in there too.
And then, run "perl factMsieve.pl 53333_237".

53333_237.poly ^*1

n: 49228409945014451582078571603601207431885178000257836419796157942293806981703913688420430727714519132118778080449532800862622876428807127695683403073333260005113627804924496330281659235968971290683
m: 10000000000000000000000000000000000000000
deg: 6
c6: 2
c0: -125
skew: 1.99
type: snfs
lss: 1
rlim: 71000000
alim: 71000000
lpbr: 30
lpba: 30
mfbr: 61
mfba: 61
rlambda: 2.7
alambda: 2.7

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

Efforts by ECM

The efforts by ECM to find small factors of this 197-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 30-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)

Level	B1	Reported runs Total / Required runs (Required runs for lower level)	Name
30	25e4	430	Makoto Kamada	Oct 31, 2008
30	25e4	430 / 430
35	1e6	0 / 825
35	1e6	/ 825
40	3e6	0 / 2336 (294)
40	3e6	/ 2336 (294)
45	11e6	0 / 4479 (677)
45	11e6	/ 4479 (677)
50	43e6	0 / 7553 (1277)
50	43e6	/ 7553 (1277)

Command line to find prime factors up to about 35-digit

echo 49228409945014451582078571603601207431885178000257836419796157942293806981703913688420430727714519132118778080449532800862622876428807127695683403073333260005113627804924496330281659235968971290683 | ecm -n -c 825 1e6

Command line to find prime factors up to about 40-digit

echo 49228409945014451582078571603601207431885178000257836419796157942293806981703913688420430727714519132118778080449532800862622876428807127695683403073333260005113627804924496330281659235968971290683 | ecm -n -c 2336 3e6

Command line to find prime factors up to about 45-digit

echo 49228409945014451582078571603601207431885178000257836419796157942293806981703913688420430727714519132118778080449532800862622876428807127695683403073333260005113627804924496330281659235968971290683 | ecm -n -c 4479 11e6

Command line to find prime factors up to about 50-digit

echo 49228409945014451582078571603601207431885178000257836419796157942293806981703913688420430727714519132118778080449532800862622876428807127695683403073333260005113627804924496330281659235968971290683 | ecm -n -c 7553 43e6

Submit factors

Make reservation

Back to Factorizations of near-repdigit numbers