Contribution and Reservation

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 224.51-digit and the GNFS difficulty is 174.16-digit. SNFS must be faster than GNFS. It will take about 127 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

1. Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 53333_223.
2. Put the following polynomial file 53333_223.poly in there too.
3. And then, run "perl factMsieve.pl 53333_223".

n: 1439061717748382649005287872012193105146741247215249615258759600836114834368382013790148433666715798163328446027602060403047107153474735819412103034776561086499720919073748039
m: 20000000000000000000000000000000000000
deg: 6
c6: 5
c0: -2
skew: 0.86
type: snfs
lss: 1
rlim: 39000000
alim: 39000000
lpbr: 29
lpba: 29
mfbr: 59
mfba: 59
rlambda: 2.6
alambda: 2.6

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

See also

• How to contribute your factors

The efforts by ECM to find small factors of this 175-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 30-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)