Contribution and Reservation

(41·10¹⁹⁷+13)/9 =: 4(5)₁₉₆7_<198>; = 19 · 89 · 1252453453_<10> · [215097887546225092129269062269897906402432861350627836703716588843741047161130187260732959061415610213629994440986511977939879628526922173002591176030223396339484104327398725924681278459_<186>] SUBMIT/RESERVE

Status

Expression:	(41·10¹⁹⁷+13)/9
Composite Factor:	215097887546225092129269062269897906402432861350627836703716 588843741047161130187260732959061415610213629994440986511977 939879628526922173002591176030223396339484104327398725924681 278459 (186-digit)
Status:	Not factored. Not reserved. You can submit its factors or reserve it for submitting in the future.

How to factor it

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 199.52-digit and the GNFS difficulty is 185.33-digit. SNFS must be faster than GNFS. It will take about 19 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 45557_197.
Put the following polynomial file 45557_197.poly in there too.
And then, run "perl factMsieve.pl 45557_197".

45557_197.poly ^*1

n: 215097887546225092129269062269897906402432861350627836703716588843741047161130187260732959061415610213629994440986511977939879628526922173002591176030223396339484104327398725924681278459
m: 2000000000000000000000000000000000000000
deg: 5
c5: 1025
c0: 104
skew: 0.63
type: snfs
lss: 1
rlim: 14800000
alim: 14800000
lpbr: 28
lpba: 28
mfbr: 55
mfba: 55
rlambda: 2.5
alambda: 2.5

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

Efforts by ECM

The efforts by ECM to find small factors of this 186-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 30-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)

Level	B1	Reported runs Total / Required runs (Required runs for lower level)	Name
30	25e4	430	Makoto Kamada	Jan 15, 2009
30	25e4	430 / 430
35	1e6	0 / 825
35	1e6	/ 825
40	3e6	0 / 2336 (294)
40	3e6	/ 2336 (294)
45	11e6	0 / 4479 (677)
45	11e6	/ 4479 (677)
50	43e6	0 / 7553 (1277)
50	43e6	/ 7553 (1277)

Command line to find prime factors up to about 35-digit

echo 215097887546225092129269062269897906402432861350627836703716588843741047161130187260732959061415610213629994440986511977939879628526922173002591176030223396339484104327398725924681278459 | ecm -n -c 825 1e6

Command line to find prime factors up to about 40-digit

echo 215097887546225092129269062269897906402432861350627836703716588843741047161130187260732959061415610213629994440986511977939879628526922173002591176030223396339484104327398725924681278459 | ecm -n -c 2336 3e6

Command line to find prime factors up to about 45-digit

echo 215097887546225092129269062269897906402432861350627836703716588843741047161130187260732959061415610213629994440986511977939879628526922173002591176030223396339484104327398725924681278459 | ecm -n -c 4479 11e6

Command line to find prime factors up to about 50-digit

echo 215097887546225092129269062269897906402432861350627836703716588843741047161130187260732959061415610213629994440986511977939879628526922173002591176030223396339484104327398725924681278459 | ecm -n -c 7553 43e6

Submit factors

Make reservation

Back to Factorizations of near-repdigit numbers