Contribution and Reservation

(23·10²⁰⁵-41)/9 =: 2(5)₂₀₄1_<206>; = 3 · 7² · 19 · 128993 · 54876812999_<11> · [1292585756764266492344289921077155756989111344246326103760222437689634366169101524334718163368658674003285548790466061637332524167345993228785844537556672845640737460734444057926863996001_<187>] SUBMIT/RESERVE

Status

Expression:	(23·10²⁰⁵-41)/9
Composite Factor:	129258575676426649234428992107715575698911134424632610376022 243768963436616910152433471816336865867400328554879046606163 733252416734599322878584453755667284564073746073444405792686 3996001 (187-digit)
Status:	Not factored. Not reserved. You can submit its factors or reserve it for submitting in the future.

How to factor it

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 206.36-digit and the GNFS difficulty is 186.11-digit. SNFS must be faster than GNFS. It will take about 32 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 25551_205.
Put the following polynomial file 25551_205.poly in there too.
And then, run "perl factMsieve.pl 25551_205".

25551_205.poly ^*1

n: 1292585756764266492344289921077155756989111344246326103760222437689634366169101524334718163368658674003285548790466061637332524167345993228785844537556672845640737460734444057926863996001
m: 100000000000000000000000000000000000000000
deg: 5
c5: 23
c0: -41
skew: 1.12
type: snfs
lss: 1
rlim: 19300000
alim: 19300000
lpbr: 29
lpba: 29
mfbr: 56
mfba: 56
rlambda: 2.6
alambda: 2.6

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

Efforts by ECM

The efforts by ECM to find small factors of this 187-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 30-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)

Level	B1	Reported runs Total / Required runs (Required runs for lower level)	Name
30	25e4	430	Makoto Kamada	Jul 28, 2008
30	25e4	430 / 430
35	1e6	0 / 825
35	1e6	/ 825
40	3e6	0 / 2336 (294)
40	3e6	/ 2336 (294)
45	11e6	0 / 4479 (677)
45	11e6	/ 4479 (677)
50	43e6	0 / 7553 (1277)
50	43e6	/ 7553 (1277)

Command line to find prime factors up to about 35-digit

echo 1292585756764266492344289921077155756989111344246326103760222437689634366169101524334718163368658674003285548790466061637332524167345993228785844537556672845640737460734444057926863996001 | ecm -n -c 825 1e6

Command line to find prime factors up to about 40-digit

echo 1292585756764266492344289921077155756989111344246326103760222437689634366169101524334718163368658674003285548790466061637332524167345993228785844537556672845640737460734444057926863996001 | ecm -n -c 2336 3e6

Command line to find prime factors up to about 45-digit

echo 1292585756764266492344289921077155756989111344246326103760222437689634366169101524334718163368658674003285548790466061637332524167345993228785844537556672845640737460734444057926863996001 | ecm -n -c 4479 11e6

Command line to find prime factors up to about 50-digit

echo 1292585756764266492344289921077155756989111344246326103760222437689634366169101524334718163368658674003285548790466061637332524167345993228785844537556672845640737460734444057926863996001 | ecm -n -c 7553 43e6

Submit factors

Make reservation

Back to Factorizations of near-repdigit numbers