Contribution and Reservation

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 214.20-digit and the GNFS difficulty is 176.32-digit. SNFS must be faster than GNFS. It will take about 58 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

1. Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 17777_213.
2. Put the following polynomial file 17777_213.poly in there too.
3. And then, run "perl factMsieve.pl 17777_213".

n: 209927102947128172255527477476720550184027075544562096491537855794730425872278030664899902187563513228333907561760924717146946260073314975849230630876994684540632973031211495927
m: 200000000000000000000000000000000000
deg: 6
c6: 250
c0: -7
skew: 0.55
type: snfs
lss: 1
rlim: 26000000
alim: 26000000
lpbr: 29
lpba: 29
mfbr: 57
mfba: 57
rlambda: 2.6
alambda: 2.6

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

See also

• How to contribute your factors

The efforts by ECM to find small factors of this 177-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 45-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)