counterSince 16 Jun 2000STUDIO KAMADA英語 ⇒ 日本語
Home > Math > Factorizations >

Contribution and Reservation


10179+9 =
1(0)1789<180>
= 7 · 13 · 1153681 · 3770059 · 139443098990281<15> · [1811872755059516195892304830314956296297708226109641486671117966207237623694298687193320614107231164397780494682776646101280094271754040891817466416201<151>] SUBMIT/RESERVE

Status

Expression:10179+9
Composite Factor:181187275505951619589230483031495629629770822610964148667111
796620723762369429868719332061410723116439778049468277664610
1280094271754040891817466416201
(151-digit)
Status:Not factored. Not reserved. You can submit its factors or reserve it for submitting in the future.

How to factor it

ECM, P-1, P+1

Look for prime factors by GMP-ECM first. Refer to the section "Efforts by ECM". Not only ECM but also P-1/P+1 may be helpful.

SNFS

Use GGNFS and/or Msieve if GMP-ECM cannot find a factor. The SNFS difficulty of this composite number is 179.70-digit and the GNFS difficulty is 150.26-digit. SNFS must be faster than GNFS. It will take about 4 CPU-days to factor this composite number on 64-bit Opteron-2600MHz.

  1. Put factMsieve.pl to which $GGNFS_BIN_PATH and $NUM_CPUS were modified properly in the working directory 10009_179.
  2. Put the following polynomial file 10009_179.poly in there too.
  3. And then, run "perl factMsieve.pl 10009_179".
10009_179.poly *1
n: 1811872755059516195892304830314956296297708226109641486671117966207237623694298687193320614107231164397780494682776646101280094271754040891817466416201
m: 500000000000000000000000000000000000
deg: 5
c5: 16
c0: 45
skew: 1.23
type: snfs
lss: 1
rlim: 6900000
alim: 6900000
lpbr: 28
lpba: 28
mfbr: 53
mfba: 53
rlambda: 2.5
alambda: 2.5

*1 These parameters were not fully adjusted. The approximate expressions which were used for making the parameters are: deg=expt<=105?4:expt<=210?5:6 or expt<=144?4:6; d=log10(c[deg])+deg*log10(m)[digits]; time=10^(d/30-4)[hours]; skew=|c0/c[deg]|^(1/deg); rlim=round(7*10^(d/60+3)); lpbr=floor(d/25+21); mfbr=floor(d/8+31); rlambda=floor(d/25+18)/10;

See also


Efforts by ECM

The efforts by ECM to find small factors of this 151-digit composite number so far are as follows. According to the reports, unknown prime factors of this composite number are probably 35-digit or more. Please report your efforts by ECM. (Anonymous reports are not acceptable)

LevelB1Reported runs
Total / Required runs
(Required runs for lower level)
Name 
351e60 / 0  
403e6500Erik BrangerSep 22, 2009
500 / 2350  
/ 1850
4511e60 / 4370 (537)  
/ 4370 (537)  
5043e60 / 7535 (1246)  
/ 7535 (1246)  
5511e70 / 17766 (3126)  
/ 17766 (3126)  
Command line to find prime factors up to about 40-digit
echo 1811872755059516195892304830314956296297708226109641486671117966207237623694298687193320614107231164397780494682776646101280094271754040891817466416201 | ecm -n -c 1850 3e6
Command line to find prime factors up to about 45-digit
echo 1811872755059516195892304830314956296297708226109641486671117966207237623694298687193320614107231164397780494682776646101280094271754040891817466416201 | ecm -n -c 4370 11e6
Command line to find prime factors up to about 50-digit
echo 1811872755059516195892304830314956296297708226109641486671117966207237623694298687193320614107231164397780494682776646101280094271754040891817466416201 | ecm -n -c 7535 43e6
Command line to find prime factors up to about 55-digit
echo 1811872755059516195892304830314956296297708226109641486671117966207237623694298687193320614107231164397780494682776646101280094271754040891817466416201 | ecm -n -c 17766 11e7

Submit factors

Name:
(optional)
(Leave a blank or enter anonymous to withhold your name)
E-Mail:
(required)
Factorization Results:
(required)
Factorization Software:
(optional)
Execution Environment:
(optional)

Make reservation

Name:
(required)
E-Mail:
(required)
(Don't forget reservation key that appears after you click this button)

Back to Factorizations of near-repdigit numbers